Torque Ripple Reduction and Power Density Improvement of a Slotless Motor Design for Rack-Type Electrical Power Steering

초록

Electric power steering (EPS) systems have become the dominant steering solution in modern vehicles due to their advantages in energy efficiency and driving convenience. Among EPS configurations, rack-type EPS(R-EPS) is widely adopted in mid-to-large vehicles for its direct and responsive steering characteristics. However, conventional slotted motors used in R-EPS suffer from cogging torque and torque ripple caused by periodic reluctance variation in the stator tooth structure, resulting in vibration and noise directly perceived by the driver. This article proposes a slotless Surface Permanent Magnet Synchronous Motor (SPMSM) employing a Bar-Type magnet with a double-bridge rotor structure for R-EPS applications. By eliminating stator teeth, the proposed design achieves a uniform reluctance distribution during rotor rotation, theoretically reducing cogging torque to zero. The absence of stator tooth magnetic saturation further enables the use of high-remanence permanent magnets, improving gravimetric power density and enabling motor miniaturization. The proposed motor was designed and verified through finite element analysis (FEA). Compared to the conventional Arc-Type motor, the optimized design achieves a torque ripple reduction of 64.7% (from 5.07% to 1.79%) through Bar-Type magnet shaping combined with a 5 mm edge filet. The optimized design achieved an output power of 359.9 W, a gravimetric power density of 276.85 W/kg based on an active part weight of 1.30 kg, and a structural safety factor of 1146, demonstrating the effectiveness of the proposed double-bridge slotless motor for R-EPS applications.

키워드