상세 보기
The Design of an Automatic Temperature Compensation System through Smart Heat Comparison/Judgment and Control for Stable Thermal Treatment in Hyperthermic Intraperitoneal Chemotherapy (HIPEC) Surgery
- Yoon, Kicheol;
- Lee, Sangyun;
- Lee, Tae-Hyeon;
- Kim, Kwang Gi
WEB OF SCIENCE
0SCOPUS
0초록
After surgery for ovarian cancer or colorectal cancer, residual tumors are left around. A practical way to treat residual tumors is to destroy them with heat by injecting high-temperature drugs into the abdominal cavity. The injected medicinal substances are induced to flow out of the abdominal cavity; then, the spilled drug flows back into the abdominal cavity through feedback. During this process, the heat starts to decrease; thus, the treatment performance reduces. To overcome this problem, this study compares and assesses the temperature needed to maintain the heat for treatment and transmits a command signal to the heat exchanger through a look-up table (LUT). When the temperature decreases during the circulation of medications leaking out of the abdominal cavity, the LUT transmits a control signal (T-p) to the heat exchanger, which increases or vice versa. However, if the temperature (T-o) is within the treatment range, the LUT sends a T-s signal to the heat exchanger. This principle generates a pulse signal for the temperature difference (T-dif) in TC by comparing and determining the temperature (T-o) of the substance flowing out of the abdominal cavity with the reference temperature (T-ref) through the temperature comparator (TC). At this time, if the signal is 41 & DEG;C or less, the LUT generates (heats) a T-p signal so that the temperature of the heat exchanger can be maintained in the range of 41 & DEG;C to 43 & DEG;C. If the T-dif is 44 & DEG;C or higher, the LUT generates (cools) the T-a signal and maintains the temperature of the heat exchanger at 41-43 & DEG;C. If the T-dif is maintained at 41-43 & DEG;C, the LUT generates a T-x signal to stop the system performance. At this time, the TC operation performance and T-dif generation process for comparing and determining the signal of T-o and T-ref for drugs leaking out of the abdominal cavity is very important. It was observed that the faster the response signal, the lower the comparison and judgment error was; therefore, the response signal was confirmed to be 0.209 & mu;s. The proposed method can guarantee rapid/accurate/safe treatment and automatically induce temperature adjustment; thus, it could be applied to the field of surgery.
키워드
- 제목
- The Design of an Automatic Temperature Compensation System through Smart Heat Comparison/Judgment and Control for Stable Thermal Treatment in Hyperthermic Intraperitoneal Chemotherapy (HIPEC) Surgery
- 저자
- Yoon, Kicheol; Lee, Sangyun; Lee, Tae-Hyeon; Kim, Kwang Gi
- 발행일
- 2023-08
- 유형
- Article
- 저널명
- Sensors
- 권
- 23
- 호
- 15
- 언어
- ENG
- 출판사
- MDPI
- 발행국가
- 스위스
- ISSN
- E 1424-3210
P 1424-8220