Te-Embedded Nanocrystalline PbTe Thick Films: Structure and Thermoelectric Properties Relationship

Citations

WEB OF SCIENCE

5
Citations

SCOPUS

6

초록

The Te-embedded PbTe nanocrystallline thick films (i.e., 50 µm) were electrodeposited, where the fraction and average grain size of PbTe and Te phases were tuned by adjusting the applied potential followed by post thermal treatment. The crystal grain boundary and Te nano-inclusion in the films played critical roles in their thermoelectric properties. The Te-embedded PbTe thick film with the average grain size of around 100 nm showed lower energy barrier height (EB = 0.023 eV) than thick films with the average grain size of a few tens of nm (EB = 0.11). Although decrease in the energy barrier reduced the Seebeck coefficient, however, it enhanced the electrical conductivity, which resulted in an increase in power factor (PF). The highest power factor was 183 µw K−2 cm−1, achieved at the energy barrier of 0.023 eV. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.

키워드

Electrodeposition; Inclusion; Lead telluride; Nanocrystalline; Thermoelectrics
제목
Te-Embedded Nanocrystalline PbTe Thick Films: Structure and Thermoelectric Properties Relationship
저자
Wu, T.; Lim, Jae-Hong; Lee, Kyu-Hwan; Kim, Jiwon; Myung, N.V.
DOI
10.3390/coatings11030356
발행일
2021-03
유형
Article
저널명
COATINGS
권
11
호
3